Elevator Cabins / Elevator Cabin Models
Alhamra Elevator Cabin
  Alhamra
  Horizontal Phosphoric Laminant
  As a general feature, ALHAMRA model elevator is designed as a hardened radiant laminate coating.
 İlgili Görseller
Cabin Interior Coating: Horizontally laid radial laminate over 18 mm MDF
Cabin Interior Accessories: Mirror Stainless
Inside Rack: Medium full size, 6 mm boteltel mirror
Cabin Base: PVC (Anti bacterial)
Cabinet Anneature: Internal opening, mirror stainless, laser cut design
Rack Holder: Single stainless steel handrail
Ventilation: Square Fan 220V 12/12, optional Custom Fan 220V 15/60

Cabin Interior Decoration

The inner coatings of our ALHAMRA elevator cabin we have produced consist of a radial laminate coating pressed onto 18 mm MDF. Radius laminate coatings are laid horizontally. The side walls of the elevator cabin are designed as 4 pieces, mirror side as 4 parts radial laminate coating. Depending on the preferences of our customers, the interior finish colors of the elevator cabin can be changed.

Elevator Cabin Interior Accessories

In the ALHAMRA model elevator cabinet, mirror stainless steel sheet is placed as an accessory between the radial laminations.

Elevator Car Mirror

In the elevator cabinet, a medium full length 6 mm biztel mirror was used on the rear wall.

Lift Cabin Base

The ALHAMRA model elevator cabin ground floor is made of PVC flooring. Depending on customer preference, 20 mm thick standard or special granite stone floor covering can also be applied to the elevator base.

Elevator Cabin Tavanı

The ALHAMRA model elevator is ready for domestic electrical installation and lighting in elevator ceiling in the cabin. The ceiling part of the elevator cabin is designed as an internal hinged system. At this point, the lighting inside the elevator ceiling can be easily changed from inside the cabin without reaching the cabin. The elevator pannier is made of patterned laser cutting mirror stainless steel.

Lift Cabinet

The inner hold of the elevator cabin consists of a stainless steel handrail. Thanks to the application of handrail fastening in our elevator cabs, the looseness that can occur over time can be easily removed from the elevator cab by squeezing the handle bolts. At the same time, if it is desired to change the cabinet door, the elevator cabinet can be changed easily.

Elevator Cabin Ventilation

In the elevator cabin interior ventilation system, ventilation holes are located at the bottom of the elevator car walls. However, there is a 220 V 12x12 square fan ventilation system inside the cabin ceiling. Optionally a 220 V 15/60 special fan system is installed to provide stronger airflow.

Other Features

ALHAMRA Model elevator cabin walls are our externally threaded system, which provides ease of installation in difficulties during installation. Together with elevator cab, standard bolted railing, skirt sheet, tube magnetic sheet, flexible wedge connection sheet and railing foot impact sheet are delivered.

Usage places

ALHAMRA model elevator is preferred in residential buildings, villas and offices.
  Request an Offer for this Product
Sosyal Medya
Sosyal Medya