Cabin Interior Coating: Horizontally laid radial laminate over 18 mm MDF
Cabin Interior Accessories: Mirror Stainless
In-Rack Mirror: half length, 6 mm boteltel mirror
Cabin Base: 20 mm Natural granite
Cabinet Anneature: Internal opening, mirror stainless, laser cut design
Rack Holder: Dual stainless steel handrail
Ventilation: Square Fan 220V 12/12, optional Custom Fan 220V 15/60
Cabin Interior Decoration
The inner coatings of our DARA elevator cabin, which we have produced, consist of a laminate covering pressed onto 18 mm MDF. The laminate coatings are laid horizontally. The side walls of the elevator cabin are designed as 5 pieces and the bottom of the mirror is designed as 2 piece laminate coating. Depending on the preferences of our customers, the interior finish colors of the elevator cabin can be changed.
Elevator Cabin Interior Accessories
The DARA model elevator is equipped with mirror stainless steel as an accessory between the laminate in the cabinet.
Elevator Car Mirror
In the elevator cabinet, a half-length 6 mm biztel mirror was used on the rear wall.
Lift Cabin Base
The floor part of DARA model elevator cabin is made of 20 mm natural granite stone floor. According to customer preference, special granite stone, PVC floor covering can also be applied to the elevator base.
Elevator Cabin Tavanı
The DARA model elevator is ready for domestic electrical installation and lighting in elevator ceiling in the cabin. The ceiling part of the elevator cabin is designed as an internal hinged system. At this point, the lighting inside the elevator ceiling can be easily changed from inside the cabin without reaching the cabin. The elevator pannier is made of patterned laser cutting mirror stainless steel.
Lift Cabinet
The inner hold of the elevator cabin is made up of two stainless coils. Thanks to the application of handrail fastening in our elevator cabs, the looseness that can occur over time can be easily removed from the elevator cab by squeezing the handle bolts. At the same time, if it is desired to change the cabinet door, the elevator cabinet can be changed easily.
Elevator Cabin Ventilation
In the elevator cabin interior ventilation system, ventilation holes are located at the bottom of the elevator car walls. However, there is a 220 V 12x12 square fan ventilation system inside the cabin ceiling. Optionally a 220 V 15/60 special fan system is installed to provide stronger airflow.
Other Features
The DARA Model elevator cabin walls are externally threaded to provide ease of installation during difficult installation. Together with elevator cab, standard bolted railing, skirt sheet, tube magnetic sheet, flexible wedge connection sheet and railing foot impact sheet are delivered.
Usage places
DARA model elevator is preferred in residential buildings, villas and offices.
Design your elevator Design 
START NOW
