Cabin Interior Coating: Horizontally furnished gold decorative stainless

Cabin Interior Accessories: Gold mirror stainless

Inside Rack: Medium full size, 6 mm boteltel mirror

Cabin Floor: 20 mm Special natural granite

Cabinet Tannery: 20 mm tempered laminated glass with special design

Rack Holder: Single Special patterned stainless steel handrail

Ventilation: Square Fan 220V 12/12, optional Custom Fan 220V 15/60

Cabin Interior Decoration

The interior coatings of our GOLD elevator cabin we have produced consist of gold decorative stainless steel veneer. Decorative stainless coatings are designed to be laid horizontally. The side walls of the elevator cabin consist of 5 parts. According to the preferences of our customers, the interior stainless coating patterns of the elevator cabin can be changed.

Elevator Cabin Interior Accessories

In the GOLD model elevator cabin, gold mirror stainless steel sheet is placed as an accessory between gold decorative stains.

Elevator Car Mirror

On the rear wall of the elevator cabin, the middle full length 6 mm of the biztel mirror was used.

Lift Cabin Base

The ground part of the GOLD model elevator cabin is made of 20 mm thick special natural granite stone pavement. Standard granite stone coating can also be applied to the bottom of the elevator according to customer preference.

Elevator Cabin Tavanı

The GOLD model elevator is ready in the cabinet for the interior electrical installation and lighting in the elevator ceiling. It is made of laminated glass with elevator tavan pattern.

Lift Cabinet

The inner hold of the elevator cabin consists of a single stainless steel bridge with a single special design. Thanks to the application of handrail fastening in our elevator cabs, the looseness that can occur over time can be easily removed from the elevator cab by squeezing the handle bolts. At the same time, if it is desired to change the cabinet door, the elevator cabinet can be changed easily.

Elevator Cabin Ventilation

In the elevator cabin interior ventilation system, ventilation holes are located at the bottom of the elevator car walls. However, there is a 220 V 12x12 square fan ventilation system inside the cabin ceiling. Optionally a 220 V 15/60 special fan system is installed to provide stronger airflow.

Other Features

The GOLD Model elevator cabin walls are externally threaded to provide ease of installation during installation difficulties. Together with elevator cab, standard bolted railing, skirt sheet, tube magnetic sheet, flexible wedge connection sheet and railing foot impact sheet are delivered.

Usage places

GOLD model elevator is more preferred in housing, villas, hotels and offices.