Cabin Interior Coating: Vertically furnished spot stainless

Cabin Interior Accessories: Mirror Stainless

Inside Rack: Medium full size, 6 mm boteltel mirror

Cabin Base: 20 mm natural granite

Cabinet Anneature: Internal opening, mirror stainless, laser cut design

Rack Holder: Dual stainless steel handrail

Ventilation: Square Fan 220V 12/12, optional Custom Fan 220V 15/60

The inner coatings of our HILL elevator cabin we have manufactured consist of stainless steel coating on the spot. The spot is coated with vertical stainless steel coatings. Depending on the preferences of our customers, the interior cladding patterns of the elevator cabin can be changed.

In the HILL model elevator cabin, stainless steel sheet is placed as an accessory between the point stainless.

In the elevator cabinet, a medium full length 6 mm biztel mirror was used on the rear wall.

The floor part of the HILL model elevator cabin was made of natural granite stone flooring with a thickness of 20 mm. According to customer preference, special granite stone, PVC floor covering can also be applied to the elevator base.

The HILL model elevator is ready for the internal electrical installation and lighting in the elevator ceiling in the cabin. The interior of the cabin is reinforced with spot lighting. The ceiling part of the elevator cabin is designed as an internal hinged system. At this point, the lighting inside the elevator ceiling can be easily changed from inside the cabin without reaching the cabin. The elevator pannier is made of patterned laser cutting mirror stainless steel.

The inner hold of the elevator cabin is made up of two stainless coils. Thanks to the application of handrail fastening in our elevator cabs, the looseness that can occur over time can be easily removed from the elevator cab by squeezing the handle bolts. At the same time, if it is desired to change the cabinet door, the elevator cabinet can be changed easily.

In the elevator cabin interior ventilation system, ventilation holes are located at the bottom of the elevator car walls. However, there is a 220 V 12x12 square fan ventilation system inside the cabin ceiling. Optionally a 220 V 15/60 special fan system is installed to provide stronger airflow.

HILL Our model elevator cabin walls are externally threaded to provide ease of installation during difficult installation. Together with elevator cab, standard bolted railing, skirt sheet, tube magnetic sheet, flexible wedge connection sheet and railing foot impact sheet are delivered.

HILL model elevator is preferred in residential buildings, villas, hotels and offices.