Cabin Interior Coating: Horizontally furnished square stainless

Cabin Interior Accessories: Mirror Stainless

Inside Rack: Medium full size, 6 mm boteltel mirror

Cabin Base: 20 mm Natural granite

Cabinet Anneature: Internal opening, mirror stainless, laser cut design

Rack Holder: Single stainless steel handrail

Ventilation: Square Fan 220V 12/12, optional Custom Fan 220V 15/60

Cabin Interior Decoration

The inner coatings of our LADAKH elevator cabin we have produced consist of square stainless steel coverings. Square stainless steel coatings are laid horizontally. The side walls of the elevator cabin are designed as 5 pieces square stainless steel. Depending on the preferences of our customers, the interior cladding patterns of the elevator cabin can be changed.

Elevator Cabin Interior Accessories

In the LADAKH model elevator cabin, mirror stainless steel sheet is placed as an accessory between square stainless.

Elevator Car Mirror

In the elevator cabinet, a medium full length 6 mm biztel mirror was used on the rear wall.

Lift Cabin Base

The ground part of LADAKH model elevator cabin was made of 20 mm thick natural granite stone pavement. According to customer preference, special granite stone, PVC floor covering can also be applied to the elevator base.

Elevator Cabin Tavanı

The LADAKH model elevator is ready for the domestic electrical installation and lighting in the lift elevator. The ceiling part of the elevator cabin is designed as an internal hinged system. At this point, the lighting inside the elevator ceiling can be easily changed from inside the cabin without reaching the cabin. The elevator pannier is made of patterned laser cutting mirror stainless steel.

Lift Cabinet

The inner hold of the elevator cabin consists of a stainless steel handrail. Thanks to the application of handrail fastening in our elevator cabs, the looseness that can occur over time can be easily removed from the elevator cab by squeezing the handle bolts. At the same time, if it is desired to change the cabinet door, the elevator cabinet can be changed easily.

Elevator Cabin Ventilation

In the elevator cabin interior ventilation system, ventilation holes are located at the bottom of the elevator car walls. However, there is a 220 V 12x12 square fan ventilation system inside the cabin ceiling. Optionally a 220 V 15/60 special fan system is installed to provide stronger airflow.

Other Features

Our LADAKH model lift cabin walls are externally threaded to provide ease of installation during difficult installation. Together with elevator cab, standard bolted railing, skirt sheet, tube magnetic sheet, flexible wedge connection sheet and railing foot impact sheet are delivered.

Usage places

LADAKH model elevator is preferred in residential buildings, villas, hotels and offices