Cabin Inner Coverage: 18 mm thick laminate over MDF

Cabin Interior Accessories: Gold mirror stainless

In-Rack Mirror: half length, 6 mm boteltel mirror

Cabin Base: 20 mm special natural granite

Cabinet Anneature: Internal opening, gold mirror stainless, laser cut design

Rack Holder: Single stainless steel handrail

Ventilation: Square Fan 220V 12/12, optional Custom Fan 220V 15/60

Cabin Interior Decoration

The inner coatings of our METERHORN elevator cabin we have produced consist of integral laminate coating pressed onto 18 mm MDF. The laminate coating is designed by laying one piece. Depending on the preferences of our customers, the interior finish colors of the elevator cabin can be changed.

Elevator Cabin Interior Accessories

In METERHORN model elevator cabinet, gold mirror stainless sheet is placed as accessory.

Elevator Car Mirror

In the elevator cabinet, a half-length 6 mm biztel mirror was used on the rear wall.

Lift Cabin Base

The floor of the METERHORN model elevator cabin is made of 20 mm thick special natural granite stone flooring. According to customer preference, standard granite stone, PVC floor covering can also be applied to the elevator base.

Elevator Cabin Tavanı

METERHORN model elevator is ready for domestic electrical installation and lighting in elevator tent in the cabin. The ceiling part of the elevator cabin is designed as an internal hinged system. At this point, the lighting inside the elevator ceiling can be easily changed from inside the cabin without reaching the cabin. The elevator is made of stainless steel with laser cut gold mirror design.

Lift Cabinet

The inner hold of the elevator cabin consists of a stainless steel handrail. Thanks to the application of handrail fastening in our elevator cabs, the looseness that can occur over time can be easily removed from the elevator cab by tightening the handrail bolts. At the same time, if it is desired to change the cabinet door, the elevator cabinet can be changed easily.

Elevator Cabin Ventilation

In the elevator cabin interior ventilation system, ventilation holes are located at the bottom of the elevator car walls. However, there is a 220 V 12x12 square fan ventilation system inside the cabin ceiling. Optionally a 220 V 15/60 special fan system is installed to provide stronger airflow.

Other Features

The METERHORN model lift cabin walls are an externally threaded system that provides ease of installation in the event of difficulty during installation. Together with the elevator cab, standard bolted railing, skirt sheet, tube magnetic sheet, flexible wedge connection sheet and railing foot impact sheet are delivered.

Usage places

METERHORN model elevator is more preferred in housing, villas, hotels and establishments.