Cabin Interior Coating: Horizontally laid radial laminate over 18 mm MDF

Cabin Interior Accessories: Mirror Stainless

Inside Rack: 1/3 2 pieces Full size, 6 mm boteltel mirror

Cabin Base: 20 mm Natural granite

Cabinet Anneature: Internal opening, mirror stainless, laser cut design

Cabin Holder: Dual half-finished stainless steel handrail

Ventilation: Square Fan 220V 12/12, optional Custom Fan 220V 15/60

Cabin Interior Decoration

The inner coatings of our ZEL elevator cabin we have produced consist of radial laminate coating pressed onto 18 mm MDF. Radius laminate coatings are laid horizontally. The side walls of the elevator cabin are designed as 3 part radial laminate coating. Depending on the preferences of our customers, the interior finish colors of the elevator cabin can be changed.

Elevator Cabin Interior Accessories

In the ZEL model elevator cabin, mirror stainless sheet is placed as an accessory between the radial laminations.

Elevator Car Mirror

On the rear wall of the elevator cabinet, two 1/3 full-length 6 mm biztel mirrors were used.

Lift Cabin Base

The ground part of the ZEL model elevator cabin was made of natural granite stone with a thickness of 20 mm. According to customer preference, special granite stone, PVC floor covering can also be applied to the elevator base.

Elevator Cabin Tavanı

The ZEL model elevator is ready for domestic electrical installation and lighting in elevator tent in the cabin. The ceiling part of the elevator cabin is designed as an internal hinged system. At this point, the lighting inside the elevator ceiling can be easily changed from inside the cabin without reaching the cabin. The elevator pannier is made of patterned laser cutting mirror stainless steel.

Lift Cabinet

The inner hold of the elevator cabin consists of two half stainless coils. Thanks to the application of handrail fastening in our elevator cabs, the looseness that can occur over time can be easily removed from the elevator cab by squeezing the handle bolts. At the same time, if it is desired to change the cabinet door, the elevator cabinet can be changed easily.

Elevator Cabin Ventilation

In the elevator cabin interior ventilation system, ventilation holes are located at the bottom of the elevator car walls. However, there is a 220 V 12x12 square fan ventilation system inside the cabin ceiling. Optionally a 220 V 15/60 special fan system is installed to provide stronger airflow.

Other Features

The ZEL model elevator cabin walls are externally threaded to provide ease of installation during installation difficulties. Together with elevator cab, standard bolted railing, skirt sheet, tube magnetic sheet, flexible wedge connection sheet and railing foot impact sheet are delivered.

Usage places

ZEL model elevator is preferred in residential buildings, villas and offices.